Trinnov Audio Altitude 32, User Manual

Page: 152 / 167

152
17.2 SPEAKER POSITION REMAPPING
This feature is also available through the Main user interface. Please see the chapter about the Basic Settings.
17.3 TARGET CURVE
Please see the Setup Target Curves chapter.
17.4 LIMITER CURVE
Unlike the Maximum Boost/Attenuation parameters, the limiter curve allows to setup frequency-dependent maximum
boosts and attenuations. This curve is not engaged by default.
To define a specific limiter curve, go to Optimizer Settings/Settings/Limiter Curve:

Use the Add point mode and your mouse to create editing points around the required frequency range.

Use the Move point mode and your mouse to edit the limiter curve for the required frequency range.

Use the Delete point mode to delete editing points with your mouse.
IMPORTANT NOTE: Very steep curves should be avoided.
NOTE: Editing the maximum boost and maximum attenuation limiter curve disables the global
Maximum Boost/Attenuation settings in the Optimizer Main Settings page.
In the example above, the limiter curve will avoid too much attenuation below 100 Hz.