Trinnov Audio Altitude 32, User Manual

Page: 145 / 167

145
14.6 LFE & MISC
The LFE & Misc Setup page is also active even if the Bass Management is Off. These parameters only concerns the
subwoofer(s), LFE standing for Low Frequency Effect.
The page is divided as followed:
 A table allowing to assign the LFE channel of the content to one or more subwoofer(s)

A Low Pass – LFE section to set a filter on the LFE channel

A Misc. section with various options
LOW FREQUENCY EFFECT SETUP
This first section is here to choose which subwoofer is assigned to the LFE channel. A subwoofer assigned to the LFE
will play the .1 of the content.
To assign the LFE channel to a subwoofer, please tick the box of the desired subwoofer.
The LFE signal can be filtered. A Low Pass filter is available and only apply on the LFE channel (not on the subwoofer(s)
assigned).
Low Pass – LFE: This settings will delimit the cutoff frequency of the LFE channel. You can select the type of filter
(Linkwitz-Riley, Bessel or Butterworth), the cutoff frequency and the slope use by this filter.
+10 DB ON LFE
Unless the encoded bitstream signal is decoded upstream by another device, the +10dB on LFE input option should be
enabled (default). It applies a gain of 10dB on the incoming LFE signal.