Trinnov Audio Altitude 32, User Manual

Page: 127 / 167

127
12.4 CALIBRATE THE ACTIVE CROSSOVERS
Once the master output level is set (see previous step), the Altitude
32
’s crossover calibration tool will automatically set
up the level, delay and polarity of each driver.
Before calibration, please note:

The calibration procedure has to be done individually for each speaker;

An MLS signal is sent to each driver of the selected speaker when the Calibrate button is hit.

At the end of the calibration process, a warning message states that a new calibration of the whole set of
speakers is required.