Access Point Deployment Guide
43
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
The following table defines the fields on this screen. To edit these fields, click on the
Disable
RF
button. After you make the changes, click on the
Save
button and then the
Enable RF
button.
Note:
If you disable the RF, the AP is still connected to the Gateway.
Note:
The maximum transmit power for the AP and the Node is based on the setting in the
Regulatory Domain field.
Table 8.
Parameters on the Field Configuration Screen
Field
Unit/Format Description
Reset Broadcast Margin
Boolean
Resets the broadcast margin. The AP stays in this state until the next
time it is rebooted.
Force Scan Day
yyyy/mm/dd
The date to perform a Force Scan.
RPMA Mode
N/A
Options are:
•
Optimize Capacity
•
Optimize Range (Default)
Online Duration
Without GPS Fix
seconds
The length of time allowed for the AP not to have a GPS fix. The
default is 600 seconds.
AP Transmit Parameters
(These parameters are based on regulatory domain, AP cable loss, and target excess SNR)
Regulatory Domain
string
The regulatory domain where the AP is deployed. The regulatory
domain limits the maximum transmit power for the AP.
AP Maximum EiRP
Target
dBm
The maximum EiRP output targeted for the AP.
Cavity Filter
Boolean
The default value is set according to country-specific regulatory
requirements.
AP Cable Loss
dB
AP cable loss measured in dB.
AP Antenna Gain
dBi
This is the gain specified for the AP antenna installed.
AP Maximum Transmit
Power
dBm
This field is not editable. The value is determined by the settings for
the other AP Transmit Parameters.
Node Transmit Parameters
(These parameters are based on regulatory domain, Node cable loss, and target excess SNR)
Node Maximum EiRP
Target
dBm
The maximum EiRP output targeted for the Node.
