AP Software Configuration via Web Interface
Access Point Deployment Guide
40
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
TRN Config Submenu
The Total Reach Network (TRN) Configuration screen (shown below) displays network
configuration parameters at the time the AP was deployed.
Figure 22.
Network Configuration screen
The following table defines the fields on this screen. To edit these fields, click on the
Disable
RF
button. After you make the changes, click on the
Save
button and then the
Enable RF
button.
Note:
If you disable the RF, the AP is still connected to the Gateway.
Table 7.
Fields on the Total Reach Network Configuration Screen
Field
Unit
Description
AP ID
Decimal
The identification number for the AP. Range is 1 – 255.
Deployment
Region ID
Decimal
The identification number for the region where the AP is deployed. Number range
is 0 – 4228250625.
System ID
Decimal
The System Identification Number. Range is 0 – 255.
Channel
Decimal
The channel on which the AP communicates. Range is 1 – 40.
