Seeker D User’s Guide
Document Num., Rev. 4
May 2018
Page 30
3. Connect the Seeker D Mobile Mount antenna connection to the right angle connector of
the antenna diplexer cable. Connect the other end of the antenna diplexer cable to the
output of the antenna diplexer. Finally, connect the low and high band antennas to the
corresponding inputs of the antenna diplexer.
When using the Seeker D Mobile Mount, an APM-3 or AVM-3
vehicle mounted whip antenna (not included) is REQUIRED
for Low Band Monitoring.
When using the Seeker D Mobile Mount, an APM-4 or AVM-4
vehicle mounted colinear array whip antenna (not included) is
REQUIRED for High Band Monitoring.
