Seeker D User’s Guide
Document Num., Rev. 4
May 2018
Page 24
Display Screen
1. GPS – Shown when the Seeker D is placed in the Mobile Mount and a GPS connection
is established with an optional Seeker MCA III. When the icon is not shown, the Seeker
D is not in the Mobile Mount or the GPS connection cannot be established with the
optional Seeker MCA III. If the icon flashes, the Seeker MCA III is connected to the GPS
but the GPS does not have a good position fix.
2. DIST – Indicates the number of the currently selected distance preset when the distance
correction has been enabled using the Seeker Setup software. Distance correction is
used to adjust the level of the received signal based on the distance from the vehicle
to the cable plant. Up to eight preset distance correction values can be enabled for the
Seeker D.
3. PK – Shown when the Peak Hold feature is active. When the icon is not shown, the
Peak Hold feature is turned off.
4. FREQ – Indicates the number of the currently selected frequency preset.
5. Tag – Shown when tagged signal leakage is detected.
1
2
3
4
5
6
7
8
9
10
11
12
