Seeker D User’s Guide
Document Num., Rev. 4
May 2018
Page 11
Seeker D Introduction
Chapter 2
This chapter:
• Describes the purpose of the Seeker D
• Gives a feature overview of the Seeker D
• Lists the equipment supplied with the Seeker D and optional accessories
• Gives a guided tour of the Seeker D and Mobile Mount and explains the display screen
• Discusses the battery of the Seeker D
• Discusses updating the firmware of the Seeker D
What is the Seeker D?
The VIAVI Seeker D™ leakage detector teamed up with our analog leakage platform provides
the complete leakage solution. The Seeker D is specifically designed for efficient distribution
leakage management, displaying numerical measurements of leaks on up to ten selectable
channels and emitting a tone proportional to leak strength.
The Seeker D accurately detects and measures signal leakage within the frequency range
of 610.5–615 MHz and aeronautical bands frequency range of 135–139 MHz. The Seeker
D may be used in its Mobile Mount for driveouts, or removed from the mount for leakage
troubleshooting on foot with a rubber duck or with optional dipole or yagi antennas.
The Seeker D (Meter/Receiver) functions with the new CT-4™ head end 1U rack mounted unit
(Tagger/Transmitter) to provide an uncompromised tagging solution for active analog or digital
systems. This feature detects tagged leaks and ignores untagged leaks, saving time from false
alarms from signals not originating in your system.
Seeker D Features
Easy Frequency Configuration
The Seeker Setup software simplifies the configuration process. Instead of going to the
factory to make hardware modifications, you can use the Seeker Setup software to adjust
frequencies.
