Tricel NOVO EN6-50, User Manual

Page: 27 / 39

27
Impact of concrete on discharge:
Under no circumstances should concrete be discharged directly onto the tank.
10.6.3 Top soil:
Clean native top soil shall not contain rocks larger than 36mm on largest dimension.
Note:
The use of geo textile barrier fabrics surrounding the primary backfill material is considered good
installation practice. The fabric must be chosen to allow the flow of water in and out of the excavation
but to prevent the movement of fine soil particles into the primary backfill material.
1. Electrical installation:
Electrical installations must be carried out by a qualified and certified electrician. Please ensure the plant
supplied complies with all local regulations and requirements. A wiring label is located on the inside of the alarm
box.
Important
Please ensure the electrical installation complies with all national regulations and requirements
The customers’ minimum responsibility shall consist in the provision of:
• A single run of 1.5mm² 3 core (two conductors plus earth conductor) steel wire armoured (SWA) cable from
the customer’s distribution cabinet to the tank unit socket box.
•
Cable protection via 10 amp MCB protected by (RCD), rated 230V, 30mA.
• The cable armour must be properly bonded to the main earth at the premises.
•
Never disconnect the power to the air pump. It is imperative that it is running 24 hours a day, every day.
1. Plumbing the plant:
The plumbing to and from the plant should be completed by a competent person in accordance with national
regulations and best practices.
Important
Do not:
Plumb storm-water (water) from roofs, drains, footpaths etc., into the Tricel Novo Wastewater treatment
plant