FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
p.
102
23.3.1 Recording a file
At the beginning, the appliance is looking of satellites to make good positioning.
The “Status GPS” display the GPS coordinates sended by GPS hardware.
The RF measurements “Level/BER/MER” or “Measurement Map’ display the associated measurement.
GPS file name
GPS file state open/close GPS file
one point record
inside GPS file
Once configurated (Measurement type, Acquisition mode), give a name to the GPS file (the appliance
propose you a default name MEM0.GPS)
Then :
Start : opens the GPS file to start recording
The appliance record measurements according to parameters (manual/timer/distance) in the file
Stop : closes the GPS file to stop recording
- the file can not be opened if “No Positioning” (less than 3 GPS satellites)
- nevertheless Acquisition Mode, the key ‘Record’ force recording
- if measurement total time is higher than timer, measurement time will be the
repetitive period
- outputting CARTOGRAPHY function will closed the file
- you can not append a file previously closed
- if positioning if lost, recording is suspended (file not closed)
- the file is always created, even it is not closed (power supply failure for example)
- if maximum number of records is reached (1000 points), file is automatically
closed
