FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
p.
19
3 Presentation
3.1
General
The field strength measurers
MCT08x
are handy appliances designed for the installation and maintenance of
any broadcasting and reception installations of analogical and digital terrestrial television channels, satellites
or cable networks.
The band ranges between
5 MHz to 2200 MHz;
this allows accurate measurements on all analogical
television standards, FM carrier waves and the various digital standards DVB-C/C2, DVB-T/T2/T2Lite,
DAB/DAB+, DVB-S/S2, DSS.
They do
Level
measurements in average, peak and power according to the selected standard.
In
Measurement Plan
mode, they scan up to 50 setups at the same time and compare them to decision
levels (min / max).
Equipped with an efficient
Bit Error Rate
measurement (various BER, MER), they allow the full validation of
digital transmissions DVB-T/T2/T2Lite, DVB-C/C2, DAB/DAB+, DVB-S/S2 and DSS.
Providing a
Constellation
diagram for digital standards, the detection and display of
Echoes and pre-
echoes
and the display of
MER per carrier
in DVB-T/T2/T2Lite and DVB-C2 to have a complete analysis of
the digital signals.
The
Spectrum
analysis,
quick and accurate, allows the display of the disturbances and the measurement of
C/N, power...
You can display the
digital TV terrestrial or satellite
under SD or HD, on standards
MPEG2, MPEG4,
and
HEVC.
The visualization of the
terrestrial analog TV
image is also possible, in
RF
signal or
CVBS
video input.
The
Measures-TV-Spectrum
mode allows the simultaneous display of level, spectrum and of video of the
same signal.
A
HDMI
socket allows the transmission of the TV picture to an external monitor.
The sound is audible through the built-in speakers, as well as available on the Jack headphone socket.
Designed for use on field, they are compact (less than 3 kg, battery included), autonomous (battery pack and
quick charger), equipped with a LCD 10’’ touchscreen (capacitive).
The high memory content allows the storage of many configurations, measurements and spectrum curves.
Each appliance is fully remote-controlled through ETHERNET connection via a computer.
