FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
p.
48
The setting time depends on the rate of the transponder.
The lower the rate, the longer the setting time.
Hence you’d better select high rate transponders to align a satellite dish.
9.2.2 Double Check Sat
This mode allows you to orientate a double LNB by checking 4 transponders on 2 selected satellites.
This mode is identical to the simple Check Sat mode
.
To access the double Check Sat mode, you have to trigger the Double key
9.2.3 Alignment of the satellite dish
Pressing the «
Alignment
» key enables the calculation of the Altitude, Azimuth and Polarization
values of your satellite dish:
Parameters :
Satellite 1:
satellite to point; or 1
st
satellite in case of multi-headed satellite dish
Satellite 2:
2
nd
satellite in case of multi-headed satellite dish (else, input the same value as
satellite 1)
Latitude:
latitude of your current geographical place
Longitude:
longitude of your current geographical place
GPS:
the GPS key inputs automatically the latitude and longitude fields (if the GPS
option is available in the appliance)
Calculations
Parameters
Acquisition of coordinates
GPS
through the built-in receiver
Sat. A
Sat. B
To return to the
simple mode
