Triax MCT 080 User Manual Download Page 129

Page: 129 / 144

FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL

128

31 Connection of the appliance to a PC

The appliance has an

ETHERNET

interface that make it possible to connect directly to a PC, or via a

network.

31.1 Required configuration

These drivers are compatible with the following operating systems: Windows Vista ™, Windows
XP ™, Windows Seven ™.

For any other operating system, please contact the technical support TRIAX.

Your PC should also have a free Ethernet port.

31.2 ETHERNET interface

For this kind of connection, no driver installation is required.

Connect the appliance to the PC with a crossover ETHERNET cable.

Configuration of the connection:

Ethernet

connection of your appliance to the PC

To change the IP address of your appliance, See chapter “Adjustment”, “IP address” for more details.

The PC software in communication with the appliance must have the same IP address as the appliance :

Attention:

If the PC has already been connected to Ethernet (network, modem…), it is

necessary to reboot the PC before connecting your appliance.

MCT0

Ethernet

network

PC software, settle the

address at

192.168.0.160

Summary of Contents for MCT 080

















































































































































Search results

Summary of Contents for MCT 080

Reviews:

Related manuals for MCT 080

Brands by name

Popular brands

Triax MCT 080, User Manual

Search results

Summary of Contents for MCT 080

Reviews:

Related manuals for MCT 080

Brands by name

Popular brands