FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
p.
51
10.1 Modification of parameters
The various parameters are:
The active List
The name of the setup
The frequency of the emitter or transponder
The standard and bandwidth for DVB-T/H and DVB-T2
The corresponding channel number for terrestrial and cable mode
The symbol rate
The polarization and the band for the satellite
The audio mode for the analogical TV
10.2 « AutoLock » function
This function allows you to lock on a digital channel (cable, satellite or terrestrial)
Just enter the frequency or channel (terrestrial), press the "AutoLock" key , the device finds in a few
seconds the standard, modulation and other signal parameters.
Terrestrial example on channel 38 (frequency 610MHz):
It is the same process in satellite mode.
The "
INFO
" key gives you access to additional indications depending on the standard
You can shift from terrestrial to satellite mode by:
- Changing the setup frequency
- Changing of standard
- Changing of setup (from a terrestrial to a satellite setup)
