Triax 492060 User Manual Download

Page: 8 / 52

Rev. 05 - 2011 - B

TDX Service Tool

System window

The System window contains a number of tabs and buttons, information

about connected units and a configuration list area.

Via the tabs you enter the different stages of set-

ting up your input and output modules.

You use the buttons in the upper right-hand corner

in connection with the TDX Service tool whereas

you use the buttons below the configuration list

area in connection with the entire setup itself.

This list displays whether any subunits are con-

nected to the main headend unit and also whether

they are up and running.

This list area will display your present configuration

of your headend system as well as the previous

versions of the configuration.

Configuration list
area

System information
list

Buttons

Tabs

Informs you when the communication between the

TDX system and the TDX Service Tool fails. For

more information, see “Communication icon” on

page 9.

Communication icon

In connection with every

new

headend system the System win-

dow in the TDX Service Tool will display an empty configuration

list area.

Note

Summary of Contents for 492060





















































Search results

Summary of Contents for 492060

Reviews:

Related manuals for 492060

Brands by name

Popular brands

Triax 492060, User Manual

Search results

Summary of Contents for 492060

Reviews:

Related manuals for 492060

Brands by name

Popular brands