30
Rev. 05 - 2011 - B
To select services from an input module, click the Serv-
ices... button next to Select input field to open the Se-
lect input modules window.
To select an input module, click the check box (square)
to the right of the module you want to use.
If you want to give your selection a name, enter the
name in the Mux name field.
Click OK to return to the Configuration window.
Next you select or enter values in the other fields in the
Configuration window.
RF level correc-
tion
To select another RF level correction, click the arrow
to the lright of the RF level correction field to open the
drop-down list with the levels you can choose from.
Select the level you want to use.
Modulation
To select which modulation to use, click the arrow to
the right of the Modulation field to open the drop-down
list with the QAM mode you can choose from.
Select the QAM mode you want to use.
TDX Service Tool
Note
There is a limit to the number of services an
output module is able to output. You can con-
sult the TDX Web Configurator to avoid over-
loading the output module, i.e. select more
services than the module in question is able
to handle.
