Triax 492060 Page 17 User Manual Download

Page: 17 / 52

Rev. 05 - 2011 - B

TDX Service Tool

IP settings

When you have clicked the Activate button to access your licence

your TDX unique ID is changed and the activation key is deleted.

Note

When you have accessed your licence you use e.g. the IPTV tab to select

the services you want to output in connection with the licence.

If you want to buy more licences you will have to contact Triax with

the new TDX unique ID to get a new activation key to access an ad-

ditional licence.

If your TDX headend system is part of a network you have to change the IP

address of the configuration port to include the main unit in the network.
To enter the IP settings area, click the arrow bracket to the left of IP settings.

Rev. 05 - 2011 - B

TDX Service Tool

Enter a new IP address, subnet mask and default gateway in the correspond-

ing fields.

Important

To make a changed IP address take effect you have to reboot

the TDX headend system using the Reboot button in the Sys-

tem maintenance area or switch off the power.

In case you need to reset the IP address to the factory default address, you

have to use the ID switch.
To return to factory default settings do the following:

•

Switch off the power to the main unit.

•

Set the ID switch on the main unit to “7”, then switch on the power.

The four LEDs flash red and yellow until the process of resetting the IP

address has been completed.
If the reset process has been successful the LEDs will turn green.
If the reset process fails the LEDs will turn red.

•

Switch off the power to the main unit.

•

Set the ID switch on the main unit back to the initial setting.

•

Switch on the power to the main unit.

Now you have reset the IP address to the factory default address.

To output services using an IPTV system or to include a subunit in a network

you have to enter an IP address, subnet mask and default gateway for each

unit link socket you use.

To enter the IP settings area, click the arrow bracket to the left of IP settings.

Now click the Unit link 1 tab to display the relevant fields.

With regard to IPTV you also have to enter a multicast IP address and a mul-

ticast port for each unit link socket you use. .

Summary of Contents for 492060





















































Search results

Summary of Contents for 492060

Reviews:

Related manuals for 492060

Brands by name

Popular brands

Triax 492060, User Manual

Search results

Summary of Contents for 492060

Reviews:

Related manuals for 492060

Brands by name

Popular brands