manualshive.com logo in svg

Triax 492060, User Manual

Share
Download
Triax 492060 User Manual Download Page 45

44

Rev. 05 - 2011 - B

When you have rebooted the TDX headend system, a message window is 

displayed asking you to restart your Internet browser.

When you have restarted your browser you have to log into the TDX Service 

Tool in case you need to make any changes. 

TDX Service Tool

If your list of firmware updates needs to be tidied you can remove one or 

more of the previous firmware updates listed in the Change firmware window. 

Select the firmware update and click the Delete package button. 

45

Rev. 05 - 2011 - B

TDX Service Tool

You can also reboot the TDX headend system by switching off 

the power manually.

Note

Important

When rebooting the TDX headend system or switching off the 

power the distribution of services to all your end-users will be 

interrupted. 

Reboot system

If you need to switch the TDX headend system off and then immediately start 

it again you can use the Reboot button in the System maintenance area of 

the administration window.
Click the Reboot button to reboot the TDX headend system.

The firmware update is removed from the list. 

When the TDX system has been rebooted, you close the Administration win-

dow and restart your Internet browser.
When you have restarted your browser you have to log into the TDX Service 

Tool if you need to make further changes. 

Summary of Contents for 492060





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands