Tri-Star M100LFG-TT/150, Owner'S Manual, Page: 48 / 73

9.6. Import/Export
To import a file open File->Import on the menu bar and select a txt file.
Fig.9.13. Text File Import
The text file should be in the format specified in Import/Export configuration (Fig. 9.14).
The text file above is comma delimited. Each line corresponds to a certain wire. The last number
in each line is a leading space (1). Leading space is usually the same for all the wires in the file.
Wire #1 has the following parameters:
Section message Length Gap
1 FIRST 12 3
2 SECOND 6 2
3 THIRD 4 1
Wires #2 and 3 have only one section to print
Wire # Section message Length Gap
2 1 TRI-STAR TECHNOLOGIES 12 3
3 1 LONG GAP 20 8
Fig. 9.13 shows Import/Export configuration screens.
•
Message is the number of the text file column for the section messages.
•
Length is the number of the text file column for the section lengths.
•
Gap is the number of the text file column for the section gaps.
•
Leading Space is the number of the text file column for the leading space.
•
LS Default is used if Default Value is selected for Leading Space.
•
Trailing Space is the number of the text file column for the trailing space.
•
TS Default is used if Default Value is selected for Trailing Space.
•
Delimiter is a symbol that separates different values in each line of the text file (e.g.
comma, tab, colon, semicolon, and pipe). If comma is a part of a message different
delimiter should be used (e.g. pipe).
•
Wire Type is the number of the text file column for the wire type.