background image

  

TE0714 TRM

Revision: v.55

Copyright ©  2019 Trenz Electronic GmbH

21 of 22

http://www.trenz-electronic.de

12 Disclaimer

12.1 Data privacy

Please also note our data protection declaration at 

https://www.trenz-electronic.de/en/Data-protection-Privacy

12.2 Document Warranty

The material contained in this document is provided 

“as is” 

and is subject to being changed at any time without 

notice.  Trenz  Electronic  does  not  warrant  the  accuracy  and  completeness  of  the  materials  in  this  document. 
Further,  to  the  maximum  extent  permitted  by  applicable  law,  Trenz  Electronic  disclaims  all  warranties,  either 
express or implied, with regard to this document and any information contained herein, including but not limited to 
the  implied  warranties  of  merchantability,  fitness  for  a  particular  purpose  or  non  infringement  of  intellectual 
property. Trenz Electronic  shall not be  liable for errors or  for  incidental  or  consequential damages in  connection 
with the furnishing, use, or performance of this document or of any information contained herein.

12.3 Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any 
damages  whatsoever  (including,  without  limitation,  those  resulting  from  lost  profits,  lost  data  or  business 
interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to 
this document, or the materials or information contained at any or all such documents. If your use of the materials 
or information from this document results in the need for servicing, repair or correction of equipment or data, you 
assume all costs thereof.

12.4 Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval 
or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

12.5 Technology Licenses

The  hardware /  firmware /  software  described  in  this  document  are  furnished  under  a  license  and  may  be  used /
modified / copied only in accordance with the terms of such license.

12.6 Environmental Protection

To  confront  directly  with  the  responsibility  toward  the  environment,  the  global  community  and  eventually  also 
oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of 
their  social  responsibility  and  contribute  to  the  preservation  of  our  common  living  space.  That  is  why  Trenz 
Electronic invests in the protection of our Environment.

12.7 REACH, RoHS and WEEE

REACH

Summary of Contents for TE0714 TRM























Reviews: