TE0714 TRM
Revision: v.55
Copyright © 2019 Trenz Electronic GmbH
6 of 22
http://www.trenz-electronic.de
4 Overview
The Trenz Electronic TE0714 is an industrial-grade SoM (System on Module) based on Xilinx Artix-7, 16 MByte Flash
memory and powerful switching mode power supplies for all on-board voltages. A large number of configurable I/
O's is provided via rugged high-speed stacking
strips. TE0714
is the smallest module with transceiver (3 x 4 cm).
Refer to
http://trenz.org/te0714-info
for the current online version of this manual and other available
documentation.
4.1 Key Features
•
Xilinx Artix-7 FPGA (A15T, A35T, A50T)
•
Rugged for shock and high vibration
•
16 MByte QSPI Flash memory
•
Differential MEMS oscillator for MGT clocking
•
MEMS oscillator for PL clocks (Optional)
•
Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
•
138 FPGA I/O's (Max 68 differential)
•
5 IO's (QSPI or user I/O's)
•
XADC analog input
•
4 GTP (high-performance transceiver) lanes
•
GT reference clock inputs
•
Optimized I/O and power pins for good signal integrity
•
On-board high-efficiency DC-DC converters
•
Power supply for all on-board components
•
eFUSE bit-stream encryption (AES)
•
One user configurable LED
Different configurations for cost and performance optimization available upon request. Available options are:
•
FPGA Type (A15T, A35T, A50T), temperature grade
•
GT clock frequency (or none if not implemented)
•
PL clock frequency and precision (or none if not implemented)
•
Config and B14 bank Voltage: 1.8V or 3.3V
•
SPI Flash type (or none if not implemented)
•
LED Color (or none if not implemented)
•
PUDC Pin strapping (pull high or pull down)
•
GT power enable pin strapping (default power enabled or disabled)
4.2 Block Diagram
