![background image](http://html1.mh-extra.com/html/trenz-electronic/te0714-trm/te0714-trm_manual_1158526011.webp)
TE0714 TRM
Revision: v.55
Copyright © 2019 Trenz Electronic GmbH
11 of 22
http://www.trenz-electronic.de
7 Power and Power-On Sequence
To power-up a module, power supply with minimum current capability of 1A is recommended.
TE0714 needs one single power supply with nominal of 3.3V.
7.1
Power Consumption
Test Condition (25 °C ambient)
VIN Current mA
Notes
TE0714-35, TEBT0714, empty design, GT not enabled
110mA
Table 7: Power Consumption
Actual power consumption depends on the FPGA design and ambient temperature.
7.2 Power Distribution
Dependencies
Figure 3: Power Distribution
7.3 Power-On Sequence
There is no specific or special power-on sequence, single power source is needed as VIN, rest of the sequence is
automatic.