TRENDware TEG-S2500i, User Manual

Page: 68 / 142

- 68 -
4.2.1. Port Configuration
This page can change every port status.
Press Space key to change configures of per item.
1. InRate (100K/unit):
User can set input rate control, per unit is 100K. The valid range is 0~1000.
0: disable rate control.
1~1000: valid rate value.
2. OutRate (100K/unit):
User can set output rate control, per unit is 100K. The valid range is 0~1000.
0: disable rate control.
1~1000: valid rate value.
3. Enabled:
User can disable or enable this port control.
“ Yes ” that mean the port is enable.
“ No ” that mean the port is disable.
4. Auto:
User can set auto negotiation mode is “ Auto ”, “ Nway_Force ”, “ Force ” of per port.
5. Spd/Dpx:
User can set “ 100M bps” or “ 10M bps” speed on port 1~port 24,
Set “ 1000M bps”, “ 100M bps” or “ 10M bps” speed on port25~port26 (depend on module card
mode), and set “ full-duplex ” or “ half-duplex ” mode.