background image

- 128 - 

Benefits of VLANs 

 

z

 

Grouping users into logical networks for performance enhancement.   

z

 

Provides effective broadcasts containment between Segmented Ports, which prevents 

flooding of a network. 

z

 

Offers security by completely isolating from each other the different Broadcast Domains 

connected on separate Segmented Ports.   

z

 

Preserving current investment in equipment and cabling.   

z

 

Providing an easy, flexible, economic way to modify logical groups when needed.   

z

 

Network administrators can easily "fine tune" the network.     

z

 

Keeping network structure from the physical topology of the cabling.   

z

 

Making large networks more manageable.   

 

You can group users according to some shared characteristic, such as a common business 

function or a common protocol. A single switch may have several independent VLANs within 

it. Below is a example that R&D, Manufacturing and Administration group can be partitioned 

into two different VLAN group, even members in different group can’t talk directly, but they 

still share the same server, such as MRP server, printer server in Adminstration group…etc. 

 

 

Summary of Contents for TEG-S2500i















































































































































Reviews: