- 73 -
4.2.3.2. Create a VLAN Group
◆
Create Port-Based VLAN
Create a port-based VLAN and add member/nonmember ports to it.
1.
Select
<Edit>
.
2.
VLAN Name:
Type a name for the new VLAN.
3.
Grp ID:
Type the VLAN group ID. The group ID rang is 1~4094.
4.
Member:
Press
<Space>
key to choose VLAN member. There are two types to selected:
a.
Member:
the port is member port.
b.
No:
the port is NOT member port.
5.
Press
Ctrl+A
go back action menu line.
6.
Select
<Save>
to save all configure value.
NOTE:
If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port26, and you can
configure it is the member of the VLAN or not.
Summary of Contents for TEG-S2500i
