manualshive.com logo in svg

TRENDware TEG-S2500i, User Manual, Page: 70 / 142

Share
Download
TRENDware TEG-S2500i User Manual Download Page 70

- 70 - 

4.2.2. Trunk Configuration   

 

This page can create max seven trunk groups. User can arbitrarily select up to four ports from port 

1~port 26 to build a trunk group.   

 

 

Actions-> 

 

1.

 

Select 

<Edit> 

on actions menu   

2.

 

Press 

space 

key to configure the member port of trunk group. Besides, you have to set “Static” or 

“LACP” for the corresponding trunk group of TRK1~TRK7 item.   

“Static” – the normal trunk.   

“LACP” – this trunk group have link aggregation control protocol.   

3.

 

Press 

Ctrl+A 

to go back action menu line   

4.

 

Select 

<Save> 

to save all configure value.   

5.

 

If the item of TRK1~TRK7 is set “Disable”, it’s mean the trunk group is deleted.   

6.

 

All ports in the same static trunk group will be treated as single port. So when you setting VLAN 

members and Port configuration they will be toggled on or off simultaneously.   

 

NOTE: 

If VLAN group exist, all of the members of static trunk group 

must 

be in same VLAN group

.  

 

Summary of Contents for TEG-S2500i















































































































































Reviews:

No comments