TRENDware TEG-S2500i, User Manual

Page: 20 / 142

- 20 -
2.5. Administrator
There are many management functions can be set or performed if you click the
Administrator on Home Page, including:
‹
IP and Management mode
‹
Switch settings
‹
Console port information
‹
Port configuration
‹
Trunking
‹
IGMP and MAC Filter
‹
VLAN configuration
‹
Spanning tree
‹
Port Mirror
‹
SNMP/Trap Manager
‹
Security Manager
‹
802.1x Configuration
‹
Ping
‹
Agent /Stacking Management
2.5.1. IP and Management mode
User can modify the switch IP Settings by filling with the new value, then clicks “apply” button to
confirm (save) his setting, then he/she must reboot switch, then new IP configuration value will be
activated.
The Management mode indicates which role this switch is currently playing. “Agent Slave” means it
is treated as a normal switch. “Agent Master” means the "Single IP" is activated and the switch is
treated as agent manager. ”Stacking slave” is used only when this switch is going to be a member of
stacking set. This setting will force the switch to activate spanning tree protocol and some VLAN
settings for preparation of stacking switches. “Stacking Master” does the same tasks too, but it
plays the role of manager of the whole stacking switches. Only the “Stacking Slave” can be added
into the members of a stacking set under one “Stacking master”. The default management mode is
"Agent Slave".
The extra “Agent IP” setting is necessary for the “Single IP” management. It defines the IP and the
subnet mask the master switch will be assigned, which are in the same IP domain as the managed