TRENDware TEG-S2500i, User Manual

Page: 13 / 142

- 13 -
1.3.3 Telnet management
In addition to local terminal mode operation, 24+2G switch supports remote management through
Telnet over network or even over Internet for that environment without browser. In this mode, user
also has to do the same setting as required in in-band management to the IP Configuration before
executing the Telnet program. Again, after proper setting to the switch, save the setting and connect
your Ethernet cable from your PC to any port of the Ethernet Switch, then you can simply typing as
following at the command line to access the switch:
Telnet IP_Address_of_Switch
The following dialogue below appears, type in user name and password to login. To find out more
operation in this mode, please refer the instructions in chapter 3 of this manual.