manualshive.com logo in svg

TRENDware TEG-S2500i, User Manual

Share
Download
TRENDware TEG-S2500i User Manual Download Page 125

- 125 - 

Actions->

 

1.

 

Start the TFTP server, and copy firmware update version image file to TFTP server.   

2.

 

Press 

<Edit> 

on this page.   

3.

 

TFTP Server: 

Type the IP of TFTP server.   

4.

 

Remote File Name: 

Type the image file name.   

5.

 

Press 

Ctrl+A 

go to action line.   

6.

 

Press 

<Save> 

key, it will start to download the image file.   

7.

 

When save successfully, the image file download finished too.   

8.

 

Restart switch. 

 

4.6.2. Restore Configure File   

 

This page user can restore EEPROM value, save image file before, form TFTP server.   

 

 

Actions->

 

1.

 

Start the TFTP server.   

2.

 

Press 

<Edit> 

on this page.   

3.

 

TFTP Server: 

Type the IP of TFTP server.   

4.

 

Remote File Name: 

Type the image file name.   

5.

 

Press 

Ctrl+A 

go to action line.   

6.

 

Press 

<Save> 

key, it will start to download the image file.   

7.

 

When save successfully, the image file download finished too.   

8.

 

Restart switch.   

Summary of Contents for TEG-S2500i















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands