TRENDnet TEW-831DR Page 10 User Manual Download

Page: 10 / 88

TRENDnet User’s Guide

TEW-831DR

Hardware Installation

1. Position the antennas for the best WiFi coverage. It is recommended that you
position all of the antennas vertically as shown below.

2. Verify that you have an Internet connection when connecting your computer directly
to your modem.

3. Turn off your modem.

4. Disconnect the Network cable from your computer to your modem.

Note: If your modem includes a battery backup, remove the battery backup as well.

5. Connect your modem to the router WAN port

6. Connect your computer to one of the router LAN ports

7. Connect the power adapter to the router and then to a power outlet.

8. Turn on your modem.

9. Verify that the blue LEDs on the front of the router (Power, 2.4G, 5G) are on.

Summary of Contents for TEW-831DR























































































Search results

Summary of Contents for TEW-831DR

Reviews:

Related manuals for TEW-831DR

Brands by name

Popular brands

TRENDnet TEW-831DR, User Manual

Search results

Summary of Contents for TEW-831DR

Reviews:

Related manuals for TEW-831DR

Brands by name

Popular brands