manualshive.com logo in svg

TRENDnet TEG-S811Fi, User Manual, Page: 81 / 109

Share
Download
TRENDnet TEG-S811Fi User Manual Download Page 81

 

allows the P2P status of the link to be manipulated administratively. True is P2P 

enabling. False is P2P disabling. 

4. 

Edge: 

The port directly connected to end stations cannot create bridging loop in the 

network. To configure the port as an edge port, set the port to “

True

” status.

 

5. 

Non Stp: 

The port includes the STP mathematic calculation. 

True

 is not including STP 

mathematic calculation. 

False

 is including the STP mathematic calculation. 

6. Click

Apply

. 

 

 

RSTP Port Configuration interface 

 

SNMP Configuration 

 

Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes 

(servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables 

network administrators to manage network performance, find and solve network problems, 

and plan for network growth. Network management systems learn of problems by receiving 

                                                                               

 

74

 

Summary of Contents for TEG-S811Fi














































































































Reviews:

No comments