TRENDnet TEG-S811Fi, User Manual, Page: 47 / 109

function is inactive, this
command can’t be
applied.
sntp ip
[IP]
G Set SNTP server IP, if
SNTP function is
inactive, this command
can’t be applied.
switch(config)# sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index,
use “show sntp
timzezone” command
to get more information
of index number
switch(config)# sntp timezone 22
show sntp P Show SNTP
information
switch# show sntp
show sntp timezone P Show index number of
time zone list
switch# show sntp timezone
no sntp G Disable SNTP function switch(config)# no sntp
no sntp daylight G Disable daylight saving
time
switch(config)# no sntp daylight
X-ring Commands Set
Trendnet Commands Level Description Example
Xring enable G Enable X-ring switch(config)# Xring enable
Xring master G Enable ring master switch(config)# Xring master
Xring couplering G Enable couple ring switch(config)# Xring couplering
Xring dualhoming G Enable dual homing switch(config)# Xring dualhoming
Xring ringport
[1st Ring Port] [2nd Ring
Port]
G Configure 1st/2nd Ring
Port
switch(config)# Xring ringport 7 8
Xring couplingport G
Configure Coupling switch(config)# Xring couplingport
40