TRENDnet TEG-S811Fi, User Manual, Page: 28 / 109

operation for Fast
Ethernet.
speed
[10|100|1000|auto]
I Use the speed
configuration
command to specify
the speed mode of
operation for Fast
Ethernet., the speed
can’t be set to 1000 if
the port isn’t a giga
port..
switch(config)# interface
fastEthernet 2
switch(config-if)# speed 100
no flowcontrol I Disable flow control of
interface
switch(config-if)# no flowcontrol
security enable I Enable security of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# security enable
no security I Disable security of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# no security
bandwidth type all I Set interface ingress
limit frame type to
“accept all frame”
switch(config)# interface
fastEthernet 2
switch(config-if)# bandwidth type
all
bandwidth type
broadcast-multicast-floo
ded-unicast
I
Set interface ingress
limit frame type to
“accept broadcast,
multicast, and flooded
unicast frame”
switch(config)# interface
fastEthernet 2
switch(config-if)# bandwidth type
broadcast-multicast-flooded-uni
cast
bandwidth type
broadcast-multicast
I Set interface ingress
limit frame type to
“accept broadcast and
switch(config)# interface
fastEthernet 2
switch(config-if)# bandwidth type
21