TRENDnet TEG-S811Fi, User Manual, Page: 21 / 109

Console Management
Login in the Console Interface
When the connection between switch and PC is ready, and then turn on the PC and run a
terminal emulation program or Hyper Terminal and configure its communication
parameters to match the following default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
After finished the parameter settings, click “ OK “. When the blank screen shows up, press
Enter key to bring out the login prompt. Key in the “ root “(default value) for the both User
name and Password (use Enter key to switch), then press Enter key and the console
management appears right after. Please see below figure for login screen.
14