TRENDnet TEG-S811Fi, User Manual, Page: 38 / 109

static address table static
show mac-address-table
filter
P Show filter MAC
address table.
switch# show mac-address-table
filter
no mac-address-table
static hwaddr
[MAC]
I Remove an entry of
MAC address table of
interface (static)
switch(config)# interface
fastEthernet 2
switch(config-if)# no
mac-address-table static hwaddr
000012345678
no mac-address-table
filter hwaddr
[MAC]
G Remove an entry of
MAC address table
(filter)
switch(config)# no
mac-address-table filter hwaddr
000012348678
no mac-address-table G Remove dynamic entry
of MAC address table
switch(config)# no
mac-address-table
SNMP Commands Set
Trendnet Commands Level Description Example
snmp system-name
[System Name]
G Set SNMP agent
system name
switch(config)# snmp
system-name l2switch
snmp system-location
[System Location]
G Set SNMP agent
system location
switch(config)# snmp
system-location lab
snmp system-contact
[System Contact]
G Set SNMP agent
system contact
switch(config)# snmp
system-contact where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode
of SNMP
switch(config)# snmp agent-mode
v1v2cv3
snmp
community-strings
[Community]
right
[RO/RW]
G Add SNMP community
string.
switch(config)# snmp
community-strings public right
rw
snmp-server host
[IP address]
G Configure SNMP
server host information
switch(config)# snmp-server host
192.168.1.50 community public
31