TRENDnet TEG-S811Fi, User Manual, Page: 30 / 109

to disable the port.
show interface
configuration
I show interface
configuration status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
configuration
show interface status I show interface actual
status
switch(config)# interface
fastEthernet 2
(config-if)# show interface status
show interface
accounting
I show interface statistic
counter
switch(config)# interface
fastEthernet 2
(config-if)# show interface
accounting
no accounting I Clear interface
accounting information
switch(config)# interface
fastEthernet 2
switch(config-if)# no accounting
Trunk Commands Set
Trendnet Commands Level Description Example
aggregator priority
[1~65535]
G Set port group system
priority
switch(config)# aggregator priority
22
aggregator activityport
[Group ID]
[Port Numbers]
G Set activity port switch(config)# aggregator
activityport 2
aggregator group
[GroupID] [Port-list]
lacp
workp
[Workport]
G Assign a trunk group
with LACP active.
[GroupID] :1~3
[Port-list]:Member port
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
switch(config)# aggregator group
1 1-4 lacp workp 2
or
switch(config)# aggregator group
2 1,4,3 lacp workp 3
23