TRENDnet TEG-S811Fi, User Manual, Page: 68 / 109

1. System Priority: a value used to identify the active LACP. The switch with the lowest
value has the highest priority and is selected as the active LACP.
2. Group ID: There are three trunk groups to provide configure. Choose the " Group ID "
and click
Select
.
3. LACP: If enable, the group is LACP static trunk group. If disable, the group is local
static trunk group. All ports support LACP dynamic trunk group. If connecting to the
device that also supports LACP, the LACP dynamic trunk group will be created
automatically.
4. Work ports: allow max four ports can be aggregated at the same time. With LACP
static trunk group, the exceed ports are standby and can be aggregated if work ports
fail. If it is local static trunk group, the number of ports must be the same as the group
member ports.
5. Select the ports to join the trunk group. Allow max four ports can be aggregated at the
same time. Click
Add
button to add the port. To remove unwanted ports, select
the port and click
Remove
button.
6. If LACP enable, you can configure LACP Active/Passive status in each ports on State
Activity page.
7. Click
Apply
.
8. Use
De
button to delete Trunk Group. Select the Group ID and click
lete Delete
button.
61