TRENDnet TEG-S811Fi, User Manual, Page: 17 / 109

AC in the voltage range of AC 100-240V and Frequency of 50-60Hz.
The Rear Panel of the 8 10/100TX plus 1 10/100/1000T + 1 MINI GBIC Managed Switch
Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet nearby. The surface
where you put the switch should be clean, smooth, level and sturdy. Make sure there is
enough clearance around the switch to allow attachment of cables, power cord and allow
air circulation.
Attaching Rubber Pads
A. Make sure mounting surface on the bottom of the switch is grease and dust free.
B. Remove adhesive backing from your Rubber Pads.
C. Apply the Rubber Pads to each corner on the bottom of the switch. These footpads
can prevent the switch from shock/vibration.
Power On
Connect the power cord to the power socket on the rear panel of the switch. The other side
of power cord connects to the power outlet. The internal power supply of the switch works
with voltage range of AC in the 100-240VAC and Frequency of 50~60Hz. Check the power
indicator on the front panel to see if power is properly supplied.
10