© Copyright 2022 TRENDnet. All Rights Reserved.
66
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
o
Permit-
This selection allows ingress packets that conform to the
specified ACL criteria.
o
Deny-
This selection drops ingress packets that conform to the
specified ACL criteria.
•
VLAN ID:
Enter the VLAN ID to associate with this MAC ACL.
•
Source MAC
: Input the source of the MAC address
•
Destination MAC
: Input the destination MAC address
•
Source MAC Mask & Destination MAC Mask
: Enter the mask of the Source
MAC and Destination MAC.
•
802.1p Value:
Select the priority to assign with 7 being the highest priority and
0 being the lowest.
•
Ethertype (Hex)-
Specifies EtherType packet filtering
Access Control: Creating IPv4 ACL
Security > Access Control > IPv4 ACL
1. Log into your switch management pag
e (see “
Access your switch management page
on page 5).
2. Click on
Security,
then click on
Access Control,
and
click on
IPv4 ACL.
3. Click the
Add
button to create a new ACL.
4. Input a name in the field and click
Apply
to save your new ACL name to the Flash.
Access Control: Configuring IPv4 ACL
Security > Access Control > IPv4 ACE
1. Log into your switch
management page (see “
Access your switch management page
on page 5).
2. Click on
Security,
then click on
Access Control,
and
click on
MAC ACE.
3. Review the settings below and click
Apply
to save your settings.
•
ACL Name:
Select the ACL name you would like to configure.
•
Sequence:
•
Action:
Defines the ACl action linked to the rule criteria.
o
Permit-
This selection allows ingress packets that conform to the
specified ACL criteria.
o
Deny-
This selection drops ingress packets that conform to the
specified ACL criteria.
•
Type of Service:
Enter a number in the
Type of Service
field within the range of
0 to 63. This field indicates the DSCP level of interest. This field is not
mandatory and you may elect to leave it blank.
Summary of Contents for TEG-3102WS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 95: ......
