TRENDnet TEG-3102WS, User Manual

Page: 53 / 95

© Copyright 2022 TRENDnet. All Rights Reserved.
48
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
VLAN Settings
Network > IGMP Snooping > VLAN Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on IGMP Snooping , and click on VLAN Settings .
3. Select the VLAN ID to configure
4. Review the settings. Click Apply to save the settings.
•
IGMP Snooping Status – Click the drop-down list and select Enabled to enable
the IGMP snooping or Disabled to disable the feature
•
Version – Click the drop-down list and select IGMP version
Querier Settings
Network > IGMP Snooping > Querier Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on IGMP Snooping , and click on Querier Settings .
3. Select the VLAN ID to configure
4. Review the settings. Click Apply to save the settings.
•
Querier State – Click the drop-down list and select Enabled to enable the
Querier Status or Disabled to disable this feature.
•
Interval – Enter the amount of time you want your switch to send IGMP
queries.
•
Max Response Interval - Specifies the maximum time before sending a
response report.
•
Startup Query Counter – Enter the amount to start the query counter
•
Startup Query Interval – Enter the amount of time to start the query counter