© Copyright 2022 TRENDnet. All Rights Reserved.
26
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
•
Current Time:
Displays the current time that is saved on your switch
•
SNTP:
Enable to allow the switch to automatically pull the time from an
SNTP/NTP Address, and select disable to manually input the time.
•
Manual Time:
Manually input the current date and time
•
Time Zone:
Sets the current time zone you are in
•
Daylight Savings Time:
Enable to set if daylight savings is on and disable if it is
not currently in daylight savings
•
Recurring From / Recurring To:
Configures when daylight savings goes into
effect and when it ends.
•
SNTP/NTP Server Address:
Sets the primary and back up SNTP/NTP Server
Address
•
Server Port:
Sets the port that the switch needs to access.
4. At the top right of the screen, click
Apply
.
Note:
This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
SNMP
Global Settings
System > SNMP > Global Setting
1. Log into your switch
management page (see “
Access your switch management page
on page 5).
2. Click on
System
, click on
SNMP,
and click on
Global Settings
.
3. Select
Enabled
to enable SNMP or
Disabled
to disable it.
4. Input the SNMP OID engine
User List
System > SNMP > User List
1. Log into your switch
management page (see “
Access your switch management page
on page 5).
2. Click on
System
, click on
SNMP,
and click on
User List
.
3. Click
Add
to add username to the user list.
4. Review the settings and click
Apply.
•
User Name:
Enter the User Name to grant access to
Summary of Contents for TEG-3102WS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 95: ......
