TRENDnet TEG-3102WS, User Manual

Page: 52 / 95

© Copyright 2022 TRENDnet. All Rights Reserved.
47
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
4. Click Apply to save your settings to the flash.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
LACP Timeout
Network > Trunking > LACP
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on Trunk , and click on LACP .
3. Select the port to modify the settings and click Edit .
4. Select Long Timeout to configure the LACP timeout value to be 30 seconds, or Short
Timeout to configure the LACP timeout value to be 1 second.
4. Click Apply to save your settings to the flash.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
IGMP Snooping
Global Settings
Network > IGMP Snooping > Global Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on IGMP Snooping , and click on Global Settings .
3. Review the settings. Click Apply to save the settings.
•
Status – Select Enabled to enable the IGMP snooping feature or Disabled to
disable the feature.
•
Report Suppression – Enter the time suppression interval between 0 – 25.
Fast Leave
Network > IGMP Snooping > Port Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on IGMP Snooping , and click on Port Settings .
3. Review the settings. Click Apply to save the settings.
•
Fast Leave – Select Enabled to enable Fast Leave from the selected port or
Disabled to disable the feature