TRENDnet TEG-3102WS, User Manual

Page: 64 / 95

© Copyright 2022 TRENDnet. All Rights Reserved.
59
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Bandwidth Control
Bandwidth Control
QoS > Bandwidth Control
This section allows you to configure the DLF (Destination Lookup Failure), broadcast,
and multicast storm settings for each switch port.
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on QoS , click on Bandwidth Control
3. Select the port to modify and click the Edit button.
4. Review the settings below and click Apply to save your settings.
•
Ingress – Select Enabled to enable Ingress Rate Limiting or Disabled to disable
this feature.
•
Ingress Rate (kbps) - Enter the ingress rate limit value.
•
Egress – Select Enabled to enable Egress Rate Limiting or Disabled to disable
this feature.
•
Egress Rate (kbps) – Enter the egress rate limit value.
Storm Control
QoS > Storm Control
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on QoS , click on Storm Control
3. Select the port to and click Edit to modify.
4. Review the settings for each port. Click Apply to save the settings.
•
Broadcast – Click the empty box to enable Broadcast and enter the limit value
for broadcast in kbps.
•
Unknown Multicast – Click the empty box to enable Multicast and enter the
limit value for broadcast in kbps.
•
Unknown Unicast – Click the empty box to enable Unicast and enter the limit
value for broadcast in kbps.
Note: Modifying settings in the row marked All , will apply the settings to all
ports.