TRENDnet TEG-3102WS, User Manual

Page: 58 / 95

© Copyright 2022 TRENDnet. All Rights Reserved.
53
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
•
DSCP : Configure the DSCP for your switch. The range is from 0-63.
•
802.1p Remark – Enable 802.1p QoS for the assigned OUI
•
Remark CoS / 802.1p - This parameter is CoS priority level assigned to the voice
data packets received on each voice VLAN port. For the COS priority to be
effective, 802.1p Remark must be Enabled .
•
Aging Time - This parameter indicates the amount of time, in hours, after the
last IP phone's OUI was received on a port, after which this port will be
removed from the voice VLAN. The range is 30 to 1440.
4. Click Apply to save the settings.
OUI Settings
Network > Voice VLAN > OUI Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on Voice VLAN, and click on OUI Settings .
3. Select from the table to use a pre-defined OUI. To modify a pre-defined OUI, click Edit
on the far right of the table. To delete an OUI from this table, select the OUI Index and
click
Delete.
4. To add a new OUI to the table, click on Add .
5. Input the OUI Address and the name of your OUI. Click Apply to save it to the OUI
settings table.
Port Settings
Network > Voice VLAN > Port Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 5).
2. Click on Network , click on Voice VLAN, and click on Port Settings .
3. Select the port and click Edit to configure the settings of that port.
4. Review the settings and click Apply to save your settings to the flash.
•
State – Select Enabled to enable COS mode or Disabled to disable this feature.
•
CoS Mode – Select Src mode or All