2.1
Control module
The control module has 4 functions:
•
Actuate
The build-in motors and electronics drive the system
•
Control
Sends commands to the antenna dish, e.g. satellite choice, parking, etc…
•
Display
indicates the system’s status on the display
•
Update
Replaces or updates
3.1
Choosing a setup location
Several factors must be considered when deciding
•
The surface on which the ante
•
The ideal location is a place where there is
•
When the view is obstructed, choose a location with
satellite. This means that there should be no
3.2
Positioning the tripod
After choosing a
Ensure that the legs are
and rigid
Place the tripod on a surface
to be perf
will locate
in motors and electronics drive the system
commands to the antenna dish, e.g. satellite choice, parking, etc…
the system’s status on the display
Replaces or updates the software
Control panel buttons:
1.
Start (system starts search
2.
Park (system places itself in
3.
Enter (select)
4.
Arrow up
5.
Arrow down
6.
Escape (one step back)
7.
Menu
8.
Stop
9.
USB port
A USB port is located at the back of the control
module to carry out software updates
(see section 4.2 on how to update the software)
Choosing a setup location
be considered when deciding on the location of where to set up the system:
surface on which the antenna will be positioned should be reasonably flat.
The ideal location is a place where there is an unobstructed view in all directions.
is obstructed, choose a location with an unobstructed view in the direction of the desired
satellite. This means that there should be no obstructions such as trees, trailers or RV’s
After choosing a suitable setup location, you can unfold and position the tripod.
sure that the legs are fully extended so that the system will stand
and rigid position. The legs must be secured by means of the supplied pegs.
Place the tripod on a surface that is as flat as possible. The surface does not have
to be perfectly horizontal, but the more the unit is leveled, the quicker the system
locate the satellite.
Page
6
commands to the antenna dish, e.g. satellite choice, parking, etc…
searching for satellite)
Park (system places itself in the parked position)
A USB port is located at the back of the control
module to carry out software updates
how to update the software)
the location of where to set up the system:
in the direction of the desired
trees, trailers or RV’s, buildings, etc…
cation, you can unfold and position the tripod.
system will stand in a stable
the supplied pegs.
as flat as possible. The surface does not have
the unit is leveled, the quicker the system
