3.5
Searching satellite
After connecting the wiring as described in section 3.4,
connect the control module to the antenna system by pressing it firmly into its socket.
On the display of the control module the following will be
This last message will disappear within a few seconds, after which the system will present
this level, you can select the satellite of your choosing.
During its first usage, the system will preselect
previously selected satellite(s) and will show it
List of preprogrammed satellites from which you can choose:
Satellite
Position Satellite
Astra 1
19,2 E
Eutelsat 7
Astra 3
23,5 E
SES 5
Astra 2
28,2 E
Thor
Hotbird
13 E
Eutelsat 5
Hellassat 2
39 E
Eutelsat 12
Turksat
42 E
Telstar 12
Eutelsat 9
9 E
Hispasat
the wiring as described in section 3.4, switch on your satellite receiver and television. Then
to the antenna system by pressing it firmly into its socket.
On the display of the control module the following will be then shown:
within a few seconds, after which the system will present
this level, you can select the satellite of your choosing.
During its first usage, the system will preselect the Astra1 satellite. The system will store and remember
ellite(s) and will show it on the display after startup.
List of preprogrammed satellites from which you can choose:
Satellite
Position
Eutelsat 7
7 E
SES 5
5 E
Thor
1 W
Eutelsat 5
5 W
Eutelsat 12
12,5 W
Telstar 12
15 W
Hispasat
30 W
TRAVEL VISION
Recreation
FIRMWARE V****
BOOTING
ASTRA1 19.2°
∞
TURN LNB TO 0
page 9
and television. Then
within a few seconds, after which the system will present the satellite menu. At
The system will store and remember
