Once the GPS position has been found,
right position.
(Note: The mentioned Dish position is just
Additionally the correct position of bracket will be indicated.
After you have positioned the bracket, press the Start button (1)
The system will start the calibration within 5 seconds and search
following messages will be presented
After this startup phase, the system will automatically begin its search for the selected satellite. For example:
Once the Travel Vision R6 ® has found the satellite,
optimization of its alignment in small increments
show the following message:
Once the GPS position has been found, read off the corresponding bracket adjustment and put the bracket in the
mentioned Dish position is just an example.)
Additionally the correct position of bracket will be indicated.
Bracket in position 1 or 2
positioned the bracket, press the Start button (1)
on within 5 seconds and search its vertical and horizontal reference points.
will be presented on the display:
CALIBRATING
PLEASE WAIT
CALIBRATING
ELEVATION
CALIBRATING
AZIMUTH
After this startup phase, the system will automatically begin its search for the selected satellite. For example:
ASTRA 1 19.2 °
SEARCH SATELLITE
Once the Travel Vision R6 ® has found the satellite, it proceeds with an internal check followed by the
optimization of its alignment in small increments. This procedure will take about 1-2 minutes. The display will
DISH IN POS. 1
AND PRESS START
page 11
and put the bracket in the
its vertical and horizontal reference points. The
After this startup phase, the system will automatically begin its search for the selected satellite. For example:
nal check followed by the
2 minutes. The display will
