Traub TNX65/42, Installation Instructions Manual, Page: 59 / 66

59
10.2016
TNX65/42
Alignment, component installation and commissioning
Precise alignment of the machine
Requirements
• The hydraulic unit in the fluid cabinet must be filled with hydraulic fluid.
• The machine must be connected to the power supply.
Switching on the machine
Before the machine is put into operation for the first time, its own-
er must ensure that the machine and its safety mechanisms are in
good working order. This must also be checked at reasonable, regu-
lar intervals during operation, but at least whenever the machine has
been repaired or serviced.
• Switch on the machine at the master switch.
• Press "NC ON".
• Press "Drives ON".
• Open/close working area door (activate safety function).
Check / correct position and torsion of the machine
Precision adjustment of the machine is carried out with the aid of a fixture
inserted in the turret on tool carrier 2.
Spirit levels with an accuracy of 0.02 mm/m are placed on this fixture in Z and X
directions in order to check the machine’s position and torsion.