Traub TNX65/42, Installation Instructions Manual, Page: 13 / 66

13
14.03.2022
TNX65/42
Preparations
This section is addressed to the persons responsible for the installation and
their staff.
The information provided here allows you to prepare the installation site and its
surroundings such that the machine, when delivered, can be installed and put
into operation immediately.
Be sure to carefully plan the delivery, unloading, and transporting of the ma-
chine from the unloading site to the installation site.
The installation plan applicable for this machine was already submit-
ted for approval after the contract award.
Upon delivery of the machine, it is included in Chapter Diagrams and
drawings on the supplied data carrier.
Take the size (dimensions) and masses of each unit into consideration.
Suitable transporting and lifting means must be available when the machine is
delivered.
Any obstacles along the transport route from the unloading site to the installa-
tion site must be eliminated before the machine is delivered.
Check the transport route for load capacity, levelness, damaged pavement,
traverse grooves, slopes, gradients, etc.
Is the width and height of entrances and gates sufficient?
If elevators are to be used, do they have sufficient capacities?
Proper planning will pay off!
Suitable transporting and lifting aids
–Crane
–Truck-mounted crane
–Forklift
–Transport trolley
–Transport rollers
–Armored rollers
–Hydraulic jacks
–Forklift (only for separate units).
General information