Traub TNX65/42, Installation Instructions Manual, Page: 14 / 66

14
14.03.2022
TNX65/42
General information
Risk of crushing
The installation site must be chosen such that moving parts of the
machine, including hand-operated doors, flaps, etc., do not create
risks of being crushed against walls, columns, or hall installations.
Danger from falling machine/parts
No persons are allowed to remain under suspended loads!
Transporting the machine
The machine can be transported with a crane, forklift, or armored
rollers.
The machine must be lifted from the operating side when transport-
ed by a forklift.
In any case, the machine, including the bar loading magazine, must
be doweled to the floor.
Information on transporting the machine with a truck
To avoid heavy impact during transport, the truck should have air suspension!
Dimensions (without attachments)
TNX 65/42 / TNX 65/42 with milling unit
Foundation length mm 3690
Foundation width mm 1400
Foundation depth mm 550